The firewood rack must be set at a distance from home so that it prevents insects and snakes entering home. Firewood may be stacked in racks that allow air circulation and seasoning of firewood during the course of time.
Firewood racks helps to keep the seasoned firewood or unseasoned firewood off the ground. When firewood stored on the ground takes long time to cure. portable racks are also available which has wheels so that the firewood logs can be moved to any place.

Top of the firewood racks must be covered properly with heavy-duty vinyl covers to protect the firewood and make available ready to burn. Firewood racks made up of steel is widely used and they also fitted with wheels to make it mobile. Firewood racks which can hold ¾ of a cord or 1/8 of a cord are readily available in the market. Copper firewood racks to store firewood logs with hooks to hold tools for cutting firewood logs into smaller pieces are also available. Firewood racks come out in different sizes and shapes. Firewood rack is an essential accessory in the fireplace as it is the primary source of heat.

Firewood racks crafted with nice shelters and with perfect size constructed with heavy duty steel with machine welded joints and zinc finish are resistant from moisture, rain or sun light. They serve for many years as an outdoor or garden accessory. Firewood racks with user friendly devices such as easily adjustable in height and length are more useful to hold smaller logs and larger logs.

Fire wood rack covers should have the facility of assembling and disassembling so that it can serve both winter and summer seasons. Loading and unloading of firewood logs must be taken care of while buying firewood racks. Firewood racks ranging from 3 feet to 12 feet are used for storing small quantity to large number of firewood longs. Firewood racks with power coat finish, arc welded, with heavy duty cover and of course structural warranty brings confidence among customers and make use of the same.

Firewood Racks are designed to store firewood in an organized way. Firewood racks are designed for interior or kitchen use also. outdoor firewood racks may be simple and does not require much design or fancy. However, indoor firewood racks must have nice design and luxury.

Different materials are used to make firewood racks ranging from metals, acrylic or wood. Animal themes are also used to decorate indoor or outdoor firewood racks. Hundreds of firewood logs can be stored in big firewood racks for several seasons. White cedar wood made firewood racks look natural and is rust resistant and durable. Firewood racks are highly functional and provide charm to the home.
About the Author

Simon Douglas, author and furniture retailer provides the largest selection of Firewood Racks, wooden planters, picnic tables, and Adirondack chairs on the internet. Read more for great cedar furniture ideas for you patio.

Does it have to be pretty?

Will it be inside our outside (small or large quantities)?

Will you be in a hurry to load it up, or do you have some time?

By keeping the wood raised, the extra air circulation keeps the bugs and rodents down.

No matter what dimensions you choose for your firewood rack, when the weather turns cold and blustery, you’ll be amazed at how much wood this unit can hold.

Here is a plan for building your own firewood rack.

Article Content
Shopping List
Instructions
Shopping List
Lumber
Hardware/Finishing Materials

* Lumber (for long rack)
* 2 (8') 1 x 4s*
* 1 (10') 1 x 4*
* 6 (8') 2 x 4s* (for short rack)
* 1 (8') 1 x 4*
* 1 (10') 1 x 4*
* 5 (8') 2 x 4s*

* Use lumber rated or sealed for outdoor use.
* 8 (1/2-13 x 4) galvanized carriage screws
* 4 (1/2-13 x 6) galvanized carriage screws
* 12 (1/2") galvanized fender washers
* 12 (1/2") galvanized lock washers
* 12 (1/2-13) galvanized hex nuts
* 1-lb. box 3" deck screws
* 1-lb. box 1-5/8" deck screws
* Exterior wood glue

Tools
* Tape measure
* Pencil
* Adjustable wrench
* Miter or circular saw
* Power drill and bits, including countersink and 1/2" spade bit
* Framing square
* Socket set or adjustable wrench
* Clamps
* Dust mask
* Goggles
* Hearing Protection

Instructions

Step 1: Cut all pieces per the cut list, except for the scribe cuts on the ends of the braces. The bottom ends of the uprights and the braces are cut at a 15-degree angle (see Figure 2). Use the measurements shown in the illustration to set up the first cut. Use that piece as a template for the remaining cuts. Pre drill for all screws.

Cut List
Part Material Size Quantity
side rail* (8') 2 x 4 93" 2
end piece (8') 2 x 4 21" 2
pad (8') 2 x 4 6" 6
upright (8') 2 x 4 36" 4
spacer (8') 2 x 4 6" 4
brace (8') 2 x 4 24" 4
top (8') 2 x 4 24" 2
crosspieces* (8- & 10') 1 x 4 24" 13

*For short version, cut all as above, except for the following:
side rail (8') 2 x 4 46-1/2" 2
crosspieces (8- & 10') 1 x 4 24" 9

Assembly
Step 2: Assemble the base frame.

a. Attach the end pieces to the side rails with glue and 3" screws. Screw the end pieces into the end grain of the side rails. Check for square by measuring diagonally from corner to corner, adjusting until measurements are equal.

b. Using glue and 3" screws, fasten four corner pads to the base frame so that each is flush with side rail and end piece. Repeat for the two pads centered on each side rail, flush with the outside edge. Check for square (by measuring diagonally) after installing each corner pad. When all pads are attached, turn the base over.

Step 3: Install five bottom crosspieces (three for the short rack).

a. Secure one of the crosspieces so it is centered on each side rail lengthwise and crosswise. Use glue and 1-5/8" screws.

b. Attach four more crosspieces (two more for the short rack) on either side of the center crosspieces at 7" intervals (5" for the short rack), as shown in Figure 1.

Long rack.
You can easily alter these plans for a longer or shorter rack.

Step 4: Assemble the uprights, braces, spacers, and top pieces.

a. Mark 15 1/2" from the ends along the side rails. Put a scrap piece of 2 x 4 under this mark to prop the upright in place. Position the 15-degree angled end of the upright 2 x 4 on this mark, as shown. Clamp the upright to the side rail or drive a 3" screw near the bottom edge to hold in place.

b. Place the angled end of the brace on the inside of the side rail with the long point touching the end piece so that it rests on the corner pad, as shown. Clamp or drive a 3" screw to hold the brace in place.

c. Slide a spacer between the upright and the brace until the top inside corner of the spacer meets the top of the brace. Mark the brace where it protrudes from the inside edge of the spacer. Mark the location of the bottom edge of the spacer on the upright. Remove the brace. Cut off any wood beyond the scribe line, then reattach.

d. Place the spacer between the upright and brace on the mark made in Step 4c. Clamp, or drive a 3" screw in from each side of this junction when aligned.

e. Drill a 1/2" hole through the lower upright junctions, centered as shown. Drive a 4" carriage screw through the hole with the screw head facing the outside. Secure with a fender washer, lock washer, and hex nut. Tighten with a socket or adjustable wrench. Repeat this process through the lower brace junction (use a 4" screw) and at the spacer junction (use a 6" screw) for each corner.

f. Using glue and 3" screws, affix the top pieces to the ends of the uprights.

Step 5: Attach remaining crosspieces.

WoodWorks. a. Place the two remaining bottom crosspieces against the uprights. Secure them with glue and 1 5/8" screws.

b. Mark 3" from each of these crosspieces along the uprights. Using glue and 1 5/8" screws, attach the crosspieces at the marked locations.

c. Place a crosspiece flush with the top piece on each end, as shown. Fasten with glue and 1 5/8" screws.

d. Center the last two crosspieces between the two previously installed. Secure with glue and 1 5/8" screws

fireplace screens have been around for a relatively short time in the history of the fireplaces. They were only invented in the 18th century and, at that time, were used to keep ashes and sparks in the fire. Nowdays, they are used for much more. They are accents to the room and safety guards to keep children and pets out of the fire. They still keep embers in the fire, as well.

Typical 3 panel doors are made with a large panel in the middle, 28” – 32” wide and just as tall. Attached with hinged on either side of the large center panel are panels half the width and same height as the main panel. Hinged, 3 panel screens are more stable than single panel screens; they are less likely to fall when placed on a hearth or floor, even when bumped.

Some 3 panel fireplace screens have doors that open and close built into the large panel. These doors are handy for adding wood or adjusting the fire, because you don’t have to move the entire screen.

If you are considering a 3, 4 or 5 panel screen keep these in mind:

* Fewer hinges on a 3 panel screens let you see more of the fire
* Fewer panels are easier to move because there are fewer moving parts and are lighter
* 3 panel screens are just the right size for fireplaces up to 36” square openings
* 3 panel screens are less expensive than 4 or 5 panel screens
* There are more design styles available in 3 panel screens than in 4 or 5 paneled

Choose a screen that will add appeal to your room and keep you safe as well. Three panel screens can do this and more. They can make fire maintenance easier if you choose a screen with the door feature.

Elevating wood off the ground also helps keep bugs from inhabiting your wood pile. An elevation of at least a couple of inches is recommended. Spring is a great time to get started storing your firewood, as it takes 3 to 6 months to properly season firewood.

Firewood has always been a source for a beautiful crackling fire, providing warmth and enjoyment at a fairly low cost! Firewood has also been a source of frustration for many people.

Seasoning firewood refers to simply allowing the warm sun and natural air flow to dry out the wood. Seasoned firewood is cleaner and more efficient, producing less smoke and more heat in your fireplace.

Smoky fires with wood that doesn’t burn; along with a messy pile of bug-collecting wood in your yard has caused many people to look for better solutions. There is a solution. Use a high quality firewood rack.

Freshly cut firewood has high moisture content. It is this moisture that produces smoke and makes the wood hard to burn. The heat generated by the fire must be used to evaporate all that water before the wood fibers can burn. This creates a smoky, dead fire, which is not fun for anyone. Instead, let natural air flows and sunshine of spring and summer remove the moisture for you.

Woodhaven 5 Log Rack w Cover Made in USA SHIPS FREE    US $158.95

Woodhaven 8 Log Rack w Cover Made in USA SHIPS FREE    US $198.95

8x17 Gelco Copper Single Flue Chimney Cap    US $193.00